Zeegma Handig - Ironing Guide; After Every Use; Cleaning and Maintenance

EN
3. Check the back of clothing for any items which may be damaged by steam.
4. Do not use the steamer on metal clothing components as it may cause them to
fade.
5.
Aer you have pressed the steam acvator, you will feel vibraon and silent
buzzing. This signals regular operaon of the device.
6.
When ironing, move the steam-generang surface upwards and downwards
through clothing depressions.
7. If the device gets noisier and noisier, and steam does not come out, this means
there is no water in the tank. Check its level and add water (if necessary).
8. If you release the steam switch, it will stop coming out. If the buon has already
been locked before, unlock it in the rst place to deacvate steam. To do so,
press the key and slide it upwards.
Aer every use:
1.
If you wish to stop using the steamer, release the steam switch. If you have
already locked the key before, unlock it in the rst place to deacvate steam. To
do so, press the key and slide it upwards.
2. Press the power key or disconnect the plug from the socket.
3. Slide the water tank out and pour all remains out.
4. Leave the device vercally on a at surface to make it cool down.
How to clean and maintain:
1. Remove the fabric brush from the steamer head and then rinse this surface with
wet cloth.
2. Do not use solvents, an-corrosion agents and rough cleaning agents.
3. Do not immerse the steamer in water or other liquid.
4.
Protect the equipment against fall. Do not throw it or try to bend. Do not
disassemble the electronics.
5. Empty the tank water aer every use.
6. Do not store the steamer in a humid place.
7. Do not expose the product to sunlight.
8. Make sure the steam outlet is clean, not clogged and devoid of scale.
9. When storing, the steamer must be posioned vercally.
10. The equipment must be disposed of by a suitable recycling center.