Zehnder Rittling ComfoSwitch C Series User Manual

10 - EN
Buttons
A
MODE
Switch between AUTO mode
and MANUAL operation.
B
+
Increase the ventilation airow.
Increase settings.
C
-
Decrease the ventilation
airow.
Decrease settings.
LED indicators
1 FILTER indicator.
2 AUTO mode indicator.
3 MANUAL mode indicator.
4 Air ow indicators.
LED 3
LED 2
LED 1
B
C
4
A
1
2
3
1 Introduction
The ComfoSwitch C (henceforth
called “device”) is a control device for
residential ventilation units (henceforth
called “ventilation unit” or “HRU”). The
device can be used for the ComfoAir Q,
Comfort-Vent Q, Aeris NEXT. The device is
designed for the following purposes:
1. To set the ventilation to AUTO or
MANUAL mode;
2. To set the ventilation airow of the
ventilation unit.
There are 3 different variants of the
device (as shown on the front page):
ComfoSwitch CCH, C55, C67.
With these 3 variants the device can be
built into almost every standard frame. In
addition, the ComfoSwitch C67 is also
available with a wall-mounting casing.
Use of the unit
The unit may only be used when it
is properly installed according to the
instructions and guidelines in the installer
manual of the unit. The unit can be used by:
■ children aged from 8 years and
above;
■ persons with reduced physical
capabilities;
■ persons with reduced sensory
capabilities;

Zehnder Rittling ComfoSwitch C Series Specifications

General

Brand	Zehnder Rittling
Model	ComfoSwitch C Series
Category	Control Unit
Language	English