Use the User Manual, SAP No.: 1165-216, as additional
camera. You must be familiar with the contents of the user manual to be able to work with the
The service manual mainly covers the defined spare parts and the description of how the most
important components are replaced.
The replacement modules have been chosen in such a way that replacing them should be
possible without a special training. If in-depth work on the unit is necessary, you should attend
the appropriate service training.
fundus camera does not have to be installed by service staff. For this reason,
no Service Report is necessary.
No fastening components are allocated to and supplied with
the fastening components provided in the unit must be re-used when modules are replaced.
necessary precautions against the coming into contact with hazardous voltages and
comply with the applicable work instructions.
Cleaning Care and Servicing of the unit
The unit requires almost no servicing. We recommend having the unit serviced once a year on
an appropriate support contract.
the "System check" chapter represent a
The optical surfaces can be
cleaned using an ether-methylated spirits mixture (9:1), a
optics cleaning mixture (SM-30-8005-32) or methanol.
(removal of power supply unit)
To Next Page
