Technical instructions ZELIA ZLT
Read these instructions carefully before installing, commissioning and using
this product
The cell of the ZLT must not be splashed with large amounts of water on a reg-
ular basis. When technical blocks are integrated and/or buried, we recommend
you do not install it under a skimmer, these regularly overflow when people are
in the pool.
2
1. Packaged content
• 1 ZELIA power supply box
• 1 ZLT(25-50-75) cell
• 1 set of 2 1.5" union fittings for tubes with a 1.5" diameter
• 1 bag including
– 1 clip for the cell connector
– 4 screws and 4 attachment pegs for the power supply box
– 2 seals for the union fittings
2. Technical features
Power supply 230V ~ AC 50/60Hz
Power consumed
40 W (ZLT25) 70 W (ZLT50) 100 W (ZLT75)
(maximum)
ZLT25 - 25 cubic metre maximum
ZLT50 - 50 cubic metre maximum
ZLT75 - 75 cubic metre maximum
Maximum volume treated
Cleaning of cell Automatic by reversal of polarity
Recommended salt rate 1.5 to 4g/litre
Maximum pressure (cell) 3 bars
Maximum rate (cell) 15 m3/h
Protection index
Power supply: IP-44
Cell: IP-55
To Next Page
Loading...
