Need help?Do you have a question about the Zenitel Vingtor Stentofon 1008007000 and is the answer not in the manual?
Guide to configuring the station using its physical keypad interface.
Explains how to access and use the station's web interface for configuration.
Configures station mode and static or DHCP IP settings.
Details IP address, subnet mask, and gateway configuration.
Configures SIP server details and account parameters.
Defines display name, SIP ID, server domains, and authentication for SIP.
Configures the functions and destinations of Direct Access Keys (DAKs).
Sets up automatic configuration polling from a TFTP server.
Configures VLAN tagging and port membership for network segmentation.
Defines VLAN ID, priority, sending, and acceptance filters for ports.
Implements IEEE 802.1X for port-based network access control.
Step-by-step guide for manually upgrading the station's firmware.
Configures the station for automatic software updates via TFTP.
Parameters for TFTP provisioning, software updates, and general settings.
Parameters for configuring SIP account, domains, and proxy settings.
Parameters for speed dial, speaker volume, mic sensitivity, and RTP timeout.
Parameters for SNMP trap receiver, network, community string, and versions.
General| Category | Telephone |
|---|---|
| Audio Codecs | G.711, G.722, G.729 |
| IK Rating | IK08 |
| Protocols | SIP |
| Power | PoE |
| Operating Temperature | -25°C to +55°C |
To Next Page
