3
2
1
2
3
Select the code that operates
your amplifier and program it into
the mode in which you want the
volume to appear (e.g. CABLE or
AUX mode), as described on the
“Programming the Remote” on
page 31.
Press and hold PRG, using a blunt
instrument, on your remote until
the indicator light stays lit.
Press 4-9-9; then ENTER on the
remote. The indicator light will
flash three times if code is
accepted.
The audio system volume/mute
now appears in the mode you
have selected.
4
If you can’t find the code for your amplifier,
use the Auto Find feature on page 34.
3
To Next Page
Loading...
