To Next PageTo Next PageWhat to do if my Zenith Water System shows a Condenser overtemp.?
If your Zenith Water System shows a condenser overtemperature warning, the air filter is likely blocked. Remove any blockage, clean the filter, and consult the user guide.
How to troubleshoot a power board fault in my Zenith Water System?
If there is a power board fault in your Zenith Water System, it may be due to an electrical disruption. Check the power supply and all fuses.
Why is the hot tank under filled in my Zenith Water System?
If the hot tank is under filled in your Zenith Water System, it could be due to low water pressure. Check the water supply.
What causes compressor over-run in a Zenith Water System?
If the compressor is over-running in your Zenith Water System, it might be too hot. Ensure there is adequate ventilation.
General| Brand | Zenith |
|---|---|
| Model | HydroTap G4 |
| Category | Water Filtration Systems |
| Language | English |
Explains the safety lock feature to prevent boiling water flow.
Details touch sensitive controls for dispensing Boiling, Chilled and Sparkling water.
Explains operation of levers for dispensing and mixer tap function.
Describes operation of select button and rotary control for dispensing water.
Explains handle operation for flow rate and temperature control.
Instructions for dispensing chilled water on Classic, Elite, and Arc/Cube taps.
Instructions for dispensing boiling water with safety feature disabled.
Instructions for dispensing boiling water with safety feature enabled.
Instructions for dispensing sparkling water on Classic, Elite, and Arc/Cube taps.
Explains the meaning of Red Boiling and Blue Chilled water indicator lights.
Details the flashing warning light indicating system faults.
Describes filter light status for different tap models.
Step-by-step guide for calibrating the safety sensor on lever models.
Introduces the TOUCH screen for easy setup and operation adjustment.
Details the main menu, sub-menu, and sub-menu options with section references.
Instructions on how to change the language setting via the LCD menu.
How to view product info, system faults, and filter logs.
Guide to filter flush and filter reset procedures via the LCD.
Instructions for boiling calibration and booster unit configuration.
Procedures for purging CO2 gas lines and calibrating the Lux sensor.
How to set or change a password to protect system settings.
Information on using Wifi for remote monitoring and control.
How to set date/time and adjust boiling/chilled temperatures.
Instructions to adjust filter life and edit filter usage.
Details on Sleep mode and ON/OFF mode for energy saving.
How to schedule ON/OFF times for different days or groups.
Instructions for setting tap safety and activating Hot Isolation.
How to change the maximum dispensing time for hot, chilled, and sparkling water.
Explains how the unit notifies when filter replacement is due.
Step-by-step instructions for changing the water filter cartridge.
Cautions regarding water spillage, O-ring contact, and cartridge insertion.
Instructions for cleaning and maintaining the air inlet filter.
Procedure for changing the 2.6kg CO2 gas bottle for sparkling water.
Explains icons indicating the safety switch status (LOCKED/UNLOCKED).
Details the icon indicating when sleep mode is active.
Explains the icon that shows the heater is in OFF mode.
Describes the icon displaying remaining filter life.
Explains icons for Boiling and Chilled water temperatures.
Provides Zenith Heaters Limited's head office address, phone, and website.
Lists registered trademarks and patent information for Zenith products.
