To Next PageTo Next Page
Need help?Do you have a question about the Zenith HydroTap and is the answer not in the manual?
General| Brand | Zenith |
|---|---|
| Model | HydroTap |
| Category | Water Filtration Systems |
| Language | English |
Describes the Classic Tap option for HydroTap.
Details the Arc and Cube Tap options for HydroTap.
Outlines the Elite Tap option for HydroTap.
Explains the Celsius Tap option for HydroTap.
Steps to perform before starting HydroTap installation.
Steps to perform before commissioning the HydroTap.
Steps related to the commissioning phase of the HydroTap.
Safety considerations for users, qualifications for technicians, and general precautions.
Information on refrigerant handling and unit venting requirements.
Guidelines for safely lifting the unit and ensuring proper airflow.
Guidance on unit placement and general warnings for operation.
Specific safety warnings and precautions for handling CO2 cylinders.
Lists and describes the parts included with the HydroTap.
Details optional accessories that can be used with the HydroTap.
Specifies model types and their features (CS, CSHA).
Technical data including capacity, power, and dimensions.
Lists tools necessary for installation not typically supplied.
Essential site conditions and preparations before tap installation.
Tools for ventilation and general airflow requirements for all models.
Specific ventilation diagram and details for CS and CSHA models.
Detailed dimensions for kickboard and cabinet cutouts for ventilation.
Instructions for critical installation if the standard vent kit is not used.
Critical warnings and guidelines for storing the CO2 cylinder.
Procedures for securing the cylinder cradle and connecting the regulator.
Steps for connecting the gas hose to the regulator.
Explains the function and readings of the CO2 regulator gauges.
Detailed instructions for using John Guest fittings for tubing.
Steps for fitting hoses and tubes to the undersink unit.
Instructions for connecting the gas hose and performing leak tests.
Steps for general installation and connection of the unit.
Illustrates the underbench unit installation for the CS 175 model.
Illustrates the underbench unit installation for the CSHA 175 model.
Steps to purge CO2 gas from the system.
Steps to flush the water filter before use.
Table detailing system fault messages and their possible causes and solutions.
Contact information for Zenith Heaters Limited, including address and phone numbers.
