Why Zenith Stereo System remote control does not work?
The remote control might not be working because it is not pointed at the remote sensor, is too far from the unit, there is an obstacle, or the batteries are exhausted. Ensure the remote is pointed at the sensor, is within 23 ft (7 m), has no obstacles in its path, and has fresh batteries.
What to do if my Zenith Stereo System has no sound?
If your Zenith Stereo System has no sound, check that the audio cables are securely connected and that the external source equipment is switched ON. Connect the audio cable into the jacks securely and switch ON the external source equipment.
How to fix Zenith Stereo System when it has no power?
If your Zenith Stereo System has no power, the power cord might be disconnected. Plug the power cord into the wall outlet securely.
What to do if my Zenith Stereo System does not start playback?
If your Zenith Stereo System does not start playback, consider the following: * Ensure a disc or tape is inserted. * Make sure the inserted disc or tape is playable. * Verify the disc is placed with the playback side down. * Confirm the disc is correctly placed within the guide on the disc tray. * Check if the disc is dirty and clean it if necessary.
General| Brand | Zenith |
|---|---|
| Model | LX-140 |
| Category | Stereo System |
| Language | English |
To Next Page
