Zenith LX-140 - CD Playback; Basic Playback; To Pause Play; To Stop Play

OPERATION
13
CD Playback
Basic Playback
11
Press FUNCTION repeatedly to appear CD
indicator.
If no disc is loaded then “NO DISC” is displayed.
22
Press CD OPEN/CLOSE ( OPEN/ CLOSE) and
place the disc into the disc tray.
ote
To load an 8cm(3 inch) disc, put it onto the inner circle
of the tray.
33
Press CD OPEN/CLOSE ( OPEN/ CLOSE) to
close the disc compartment.
44
Press CD PLAY/ PAUSE ( ).
To Pause Play
Press CD PLAY/ PAUSE ( ) during playback.
Press this button again it to resume play.
To Stop Play
Press CD STOP ( ) during playback.
To Skipping the Track
• Press the CD SKIP/SEARCH ()button to
go to the next track.
• When the CD SKIP/SEARCH ( ) button is
pressed once midway through a track, the player
returns to the start of that track. When it is
pressed again, a track is skipped each time the
button is pressed.
To Play Fast Rewind or Fast Forward
After pressing CD SKIP/SEARCH (
/
) buttons for more the 2 seconds on the
front panel, then release during playback, press
PLAY ( ) at the point you want.
To Repeat Play
To play one track repeatedly
Press REPEAT once during playback.
- “REPEAT 1” appears in the display.
To play all tracks repeatedly
Press REPEAT again during playback.
- “REPEAT ALL” appears in the display.
To cancel repeat play
Press REPEAT once more during playback.
- “Repeat indicator” disappears.
ote
This unit can play a CD-R or CD-RW that
contains audio titles
To Program Play
You can arrange the order of the tracks on the discs and
create your own program. The program can contain up
to 20 tracks.
11
Press PROGRAM/MEMORY (or PROGRAM on
the remote control) on the stop mode.
22
Press CD SKIP/SEARCH (
/
)
buttons to select the track you want.
33
Press PROGRAM/MEMORY (or PROGRAM on
the remote control).
44
Repeat 1~3.
55
Press CD PLAY/ PAUSE ( ).
To check program contents
Press PROGRAM/MEMORY (or PROGRAM on the
remote control) on the stop mode.
-Atrack and program number will be displayed.
To clear program contents
Press PROGRAM/MEMORY (or PROGRAM on the
remote control) on the stop mode. And then press
( )STOP/CLEAR on the front panel or STOP( ) on
the remote control.
To add program contents
1. Press PROGRAM/MEMORY (or PROGRAM on the
remote control) repeatedly on the program stop
mode until “Track Number” blinks.
2. Repeat 2~5.
To modify program contents
1. Press the PROGRAM/MEMORY (or PROGRAM on
the remote control) to display program number you
want to modify.
2. Repeat 2~4.