OPERATIONPAGE 26
This page
explains how
to use the
timer so that
you can
record while
you are away.
Recording While You’re Away
Timer-controlled recording lets you record shows
unattended. Pick a day and time up to one year in
advance. The show may be recorded once or on
multiple days. You can schedule up to eight
different events into the PROGRAM TIMER for
recording, as long as no events overlap in the
same time period.
Turn TV and VCR on.
Place VCR in VCR mode by pressing
TV/VCR on the remote repeatedly until
the VCR indicator appears in the VCR
front panel.
Select channel 3 or 4 at the TV.
Insert a VHS cassette tape into the
VCR.
Program events to be recorded with the
Timer by following the procedure in the
TIMER MENU section. If you have a
cable box, select channel 3 or 4 (at
the VCR) as the channel to be record-
ed. Keep your cable box on when using
the Timer to record.
Enable the Timer by pressing POWER to
turn off the VCR. The TMR indicator
appears in the VCR front panel to indi-
cate the VCR is in the TIMER recording
mode.
MAIN MENU
TIMER MENU
for Program 1
TIMER MENU
for Program 8
VCR TIMER
VCR OPERATION
POWER STATUS
On Off
Off On (or set)
Disables timer-controlled
recording if an event is
Scheduled in the Timer. All
other VCR operations can
be used as desired.
Enables timer-controlled
recording if an event is
scheduled in the Timer. You
cannot be operate the VCR
manually while it is in
Timer Set mode. If you
have scheduled the Timer,
you’ll be recording at a
later time.
2
3
4
1
5
6
To Next Page
Loading...
