Need help?Do you have a question about the Zennio Z41 Pro and is the answer not in the manual?
Introduces the Z41 series devices and highlights their key differences in functionality.
Covers the necessary connections, power supply, and initial setup steps for device installation.
Covers Ethernet settings, IP address assignment, and firmware update options.
Details the primary global parameters for device functionality, grouped into main configuration tabs.
Details the ETS parameter to enable remote control via IP and the initial configuration steps.
Guides on how to pair the device with remote applications for establishing a control connection.
General| Resolution | 480 x 272 pixels |
|---|---|
| Touch Technology | Capacitive |
| KNX Interface | Yes |
| Ethernet | Yes |
| Connectivity | KNX, Ethernet |
| Certifications | CE |
| Display Type | TFT |
| Power Supply | 21-30 VDC (KNX Bus) |
| Mounting | Wall Mount |
| Operating Temperature | 0°C to +45°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Display Size | 4.1" |
To Next Page
