3.0_a
Changes in the application program:
• Additional character sets (Arab, Hebrew, Chinese,
Japanese…) for on-screen texts.
• Pairing procedure for remotely controlling the device.
• Replacement of certain icons.
• Parameters for enabling/disabling the firmware update
function via USB or Ethernet.
• Password protection for the firmware update via
Ethernet.
• Self-reconnection to the IP network and to the remote-
control service with no need of rebooting the device.
• Improvement in the graph rendering functions.
• Longer press times permitted for buttons that do not
trigger actions on long presses.
• Revision and update of communication object flags.
• Customisable function for the Reset button.
• Object name changed: “[Energy x] Cost”.
-
New Annex (Controlling Z41 Remotely via IP). 78
Device Pairing function.
6, 7, 9,
15, 17
“Ethernet” section updated to the new functionalities. 30
Object name changed: “[Energy x] Cost”.
31, 66,
67
New tab: “Firmware Update” 32
Certain numeric figures in the example were not correct. 56
1-bit objects were being mentioned for colour selection,
instead of 1-byte objects.
62
To Next Page
Loading...
