Zenoah BC3401DLM - User Manual

T3115-93120(201)
BRUSHCUTTERS
January 2002
APPLICABLE SERIAL NUMBERS:
NOTE :
1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement.
2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any
parts other than those specified by the company.
3. When placing parts orders for repair and/or replacement, check if the model name and the serial
number are applicable to those specified in the parts list, then use parts number described in the
parts list.
4. The contents described in the parts list are accurate as of the date and may change due to
improvement.
5. The parts for the machine shall be supplied ten (10) years after the machine is discontinued. [It is
possible that some specific parts may be subject to change of their delivery term and list price
within the limit of ten (10) years after the machine is discontinued. It is also possible that some
parts may be available even after the limit of ten (10) years.]
BC3401DLM
BC3401DWM
BC4301DLM
BC4301DWM
200101 and up

Summary

Zenoah Komatsu Brushcutters Parts List

Important Notes for Parts Usage

Guidelines for using genuine parts, warranty, and order placement for repair and replacement.

Cutter Group Assembly Diagram (Fig.1)

Cutter Group Parts List (Fig.1)

Detailed parts list for the Fig.1 cutter group assembly, including part numbers and descriptions.

Cutter Group Assembly Diagram (Fig.2)

Cutter Group Parts List (Fig.2)

Detailed parts list for the Fig.2 cutter group assembly, including part numbers and descriptions.

Engine Group Assembly Diagram (Fig.3)

Engine Group Parts List (Fig.3)

Detailed parts list for the Fig.3 engine group assembly, including part numbers and descriptions.

Cutter Group Assembly Diagram (Fig.4)

Cutter Group Parts List (Fig.4)

Detailed parts list for the Fig.4 cutter group assembly, including part numbers and descriptions.

Cutter Group Assembly Diagram (Fig.5)

Cutter Group Parts List (Fig.5)

Detailed parts list for the Fig.5 cutter group assembly, including part numbers and descriptions.

Engine Group Assembly Diagram (Fig.6)

Engine Group Parts List (Fig.6)

Detailed parts list for the Fig.6 engine group assembly, including part numbers and descriptions.

Company and Printing Information

Zenoah BC3401DLM Specifications

General

Fuel Tank Capacity	0.7 L
Engine Type	2-stroke
Displacement	34 cc
Shaft Type	Straight
Handle Type	Loop
Starter System	Recoil