Need help?Do you have a question about the Zenoah G3800 and is the answer not in the manual?
Warning regarding potential hearing damage from noise exposure exceeding 85 dB(A).
Identifies the port for refueling with "MIX GASOLINE".
Identifies the port for topping up chain oil.
Indicates the "O" position to immediately stop the engine.
Symbols and positions for starting the engine (warm/cold).
Symbols (H, L, T) for high-speed, slow-speed, and idle adjustment screws.
Shows directions for chain brake release (white arrow) and activation (black arrow).
Indicates adjustment for chain oil flow from MIN to MAX.
Precautions for handling flammable gasoline, including fueling procedures.
Specifies the correct ratio for gasoline and two-cycle oil (50:1).
Step-by-step guide for properly mixing gasoline and oil.
Instructions for safely refueling the chainsaw's fuel tank.
Lists fuels and practices to avoid for engine longevity and proper function.
Recommends motor oil type (SAE #10W-30, #30, #40) for the chain.
Detailed steps for starting the chainsaw engine, including choke operation.
Procedure to verify the chain oil is being supplied correctly during operation.
Guide for fine-tuning the engine's carburetor for optimal performance.
Explains the automatic chain brake and how to confirm its operation.
Instructions on how to switch the engine between normal and anti-freeze modes.
Steps to safely shut down the chainsaw engine.
Recommended practices and safety regulations for sawing wood.
Detailed procedure for safely felling a tree, considering various factors.
Instructions for cutting logs and removing branches safely.
Safety measures to prevent kickback during sawing operations.
Routine checks and cleaning after every operating session.
Regular inspection and maintenance tasks for long-term reliability.
Instructions for sharpening and maintaining the saw chain's cutting edge.
Procedure for inspecting and maintaining the guide bar for optimal performance.
Steps to diagnose and resolve issues with the engine failing to start.
Steps to diagnose and resolve issues with lack of power or rough idling.
Steps to diagnose and resolve issues with the chain oil not being supplied.
Details on what is covered, warranty period, and purchaser responsibilities.
Lists conditions and damages not covered by the warranty.
Warning regarding potential hearing damage from noise exposure exceeding 85 dB(A).
Identifies the port for refueling with "MIX GASOLINE".
Identifies the port for topping up chain oil.
Indicates the "O" position to immediately stop the engine.
Symbols and positions for starting the engine (warm/cold).
Symbols (H, L, T) for high-speed, slow-speed, and idle adjustment screws.
Shows directions for chain brake release (white arrow) and activation (black arrow).
Indicates adjustment for chain oil flow from MIN to MAX.
Precautions for handling flammable gasoline, including fueling procedures.
Specifies the correct ratio for gasoline and two-cycle oil (50:1).
Step-by-step guide for properly mixing gasoline and oil.
Instructions for safely refueling the chainsaw's fuel tank.
Lists fuels and practices to avoid for engine longevity and proper function.
Recommends motor oil type (SAE #10W-30, #30, #40) for the chain.
Detailed steps for starting the chainsaw engine, including choke operation.
Procedure to verify the chain oil is being supplied correctly during operation.
Guide for fine-tuning the engine's carburetor for optimal performance.
Explains the automatic chain brake and how to confirm its operation.
Instructions on how to switch the engine between normal and anti-freeze modes.
Steps to safely shut down the chainsaw engine.
Recommended practices and safety regulations for sawing wood.
Detailed procedure for safely felling a tree, considering various factors.
Instructions for cutting logs and removing branches safely.
Safety measures to prevent kickback during sawing operations.
Routine checks and cleaning after every operating session.
Regular inspection and maintenance tasks for long-term reliability.
Instructions for sharpening and maintaining the saw chain's cutting edge.
Procedure for inspecting and maintaining the guide bar for optimal performance.
Steps to diagnose and resolve issues with the engine failing to start.
Steps to diagnose and resolve issues with lack of power or rough idling.
Steps to diagnose and resolve issues with the chain oil not being supplied.
Details on what is covered, warranty period, and purchaser responsibilities.
Lists conditions and damages not covered by the warranty.
Power Unit| displacement | 37.2 cm³ |
|---|---|
| power | 1.62 kw/min |
| max speed | 12, 500 min⁻¹ |
| idle speed | 2, 900 min⁻¹ |
Fuel and Oil| fuel | Mixture (Gasoline 50 : Two-cycle oil 1) |
|---|---|
| fuel tank capacity | 310 cm³ |
| chain oil | Motor oil SAE# 10W-30 |
| oil tank capacity | 210 cm³ |
Cutting Head| guide bar type | Sprocket nose |
|---|---|
| guide bar size | 14 (350) in. (mm) |
| saw chain type | Oregon 91VG |
| saw chain pitch | 3/8 (9.53) in. (mm) |
| saw chain gauge | 0.05 (1.27) in. (mm) |
Dimensions| dimensions | 370 x 235 x 270 mm |
|---|---|
| dry weight | 4.15 kg |
To Next Page
