Need help?Do you have a question about the Zenoah Komatsu G3300 and is the answer not in the manual?
General| Displacement | 31.8 cm³ |
|---|---|
| Fuel | Gasoline 50 : Two-cycle oil 1 |
| Fuel tank capacity | 270 cm³ |
| Chain oil | Motor oil SAE# 10W-30 |
| Oil tank capacity | 200 cm³ |
| Carburetor | Diaphragm type (Walbro WT) |
| Ignition system | Pointless (TCl) |
| Spark plug | Champion RCJ-7Y |
| Oil feeding system | Automatic pump |
| Power | 1.35 kW/min |
| Max speed | 12, 500 min⁻¹ |
| Idle speed | 2, 900 min⁻¹ |
| Sprocket | 6T x 3/8″ |
| Guide bar type | Sprocket nose |
| Guide bar size | 14 in. (350 mm) |
| Saw chain type | Oregon 91VG |
| Pitch | 3/8 in. (9.53 mm) |
| Gauge | 0.05 in. (1.27 mm) |
Weight and Dimensions| Dimensions | 380x230x250 mm |
|---|---|
| Dry weight | 3.4 kg |
General| Displacement | 31.8 cm³ |
|---|---|
| Fuel | Gasoline 50 : Two-cycle oil 1 |
| Fuel tank capacity | 270 cm³ |
| Chain oil | Motor oil SAE# 10W-30 |
| Oil tank capacity | 200 cm³ |
| Carburetor | Diaphragm type (Walbro WT) |
| Ignition system | Pointless (TCl) |
| Spark plug | Champion RCJ-7Y |
| Oil feeding system | Automatic pump |
| Power | 1.35 kW/min |
| Max speed | 12, 500 min⁻¹ |
| Idle speed | 2, 900 min⁻¹ |
| Sprocket | 6T x 3/8″ |
| Guide bar type | Sprocket nose |
| Guide bar size | 14 in. (350 mm) |
| Saw chain type | Oregon 91VG |
| Pitch | 3/8 in. (9.53 mm) |
| Gauge | 0.05 in. (1.27 mm) |
Weight and Dimensions| Dimensions | 380x230x250 mm |
|---|---|
| Dry weight | 3.5 kg |
To Next Page
