To Next PageTo Next Page
Need help?Do you have a question about the Zenoah GZ4500 and is the answer not in the manual?
Explains symbols like WARNING, IMPORTANT, NOTE used in manual.
Illustrates and labels all external parts of the chainsaw.
Lists power, displacement, fuel capacity, dimensions, weight, etc.
Displays and explains various warning labels found on the machine.
Explains symbols for fuel/oil ports, switches, choke, adjustments, and brakes.
Provides important details on engine compliance with emission regulations.
Covers operator condition, protective gear, and basic handling safety.
Details safe usage, carrying, inspection, and servicing procedures.
Addresses kickback, specific cutting scenarios, and environmental factors.
Focuses on proper grip, avoiding obstructions, and chain maintenance safety.
Provides instructions and diagrams for fitting the guide bar and chain.
Advises on checking and readjusting tension for new chains.
Details correct fuel/oil ratios and recommended chain oil types.
Explains how to mix fuel and safely refuel the unit.
Lists fuels/oils to avoid and specifies chain oil types.
Guides through the steps to start the engine, including choke and starter.
Details how to check oil flow and adjust the carburetor.
Covers final carburetor adjustments and chain brake operation.
Explains how to stop the engine and use the anti-freeze mode.
Details how to switch between normal and anti-freeze operating modes.
Provides advice on safe sawing and specific kickback prevention measures.
Explains procedures for felling trees, including notch and felling cuts.
Covers techniques for cutting fallen limbs and pruning standing trees.
Details maintenance tasks for the air filter and oiling port after each use.
Covers periodic checks and cleaning of the cooling system, spark arrester, and exhaust.
Explains how to clean or replace the fuel filter and service the spark plug.
Provides guidelines for sharpening saw chain cutters and setting standards.
Details when to sharpen chain teeth and how to use a depth gauge.
Explains how to maintain the guide bar, including checking for rail wear.
Helps diagnose and resolve engine starting problems and power loss.
Provides guidance on storing the chainsaw, especially regarding fuel.
Explains how to use the parts list and identify applicable serial numbers.
Shows a diagram of the power unit with numbered parts for identification.
Lists part numbers and descriptions for the power unit components.
Shows another diagram of the power unit with numbered parts.
Lists part numbers and descriptions for the power unit components.
Shows a diagram of the carburetor components with numbered parts.
Lists carburetor parts and accessories like bars, chains, and tools.
Explains emission control system warranty terms and owner responsibilities.
Details the limited warranty for chainsaws, including coverage periods and exclusions.
Explains symbols like WARNING, IMPORTANT, NOTE used in manual.
Illustrates and labels all external parts of the chainsaw.
Lists power, displacement, fuel capacity, dimensions, weight, etc.
Displays and explains various warning labels found on the machine.
Explains symbols for fuel/oil ports, switches, choke, adjustments, and brakes.
Provides important details on engine compliance with emission regulations.
Covers operator condition, protective gear, and basic handling safety.
Details safe usage, carrying, inspection, and servicing procedures.
Addresses kickback, specific cutting scenarios, and environmental factors.
Focuses on proper grip, avoiding obstructions, and chain maintenance safety.
Provides instructions and diagrams for fitting the guide bar and chain.
Advises on checking and readjusting tension for new chains.
Details correct fuel/oil ratios and recommended chain oil types.
Explains how to mix fuel and safely refuel the unit.
Lists fuels/oils to avoid and specifies chain oil types.
Guides through the steps to start the engine, including choke and starter.
Details how to check oil flow and adjust the carburetor.
Covers final carburetor adjustments and chain brake operation.
Explains how to stop the engine and use the anti-freeze mode.
Details how to switch between normal and anti-freeze operating modes.
Provides advice on safe sawing and specific kickback prevention measures.
Explains procedures for felling trees, including notch and felling cuts.
Covers techniques for cutting fallen limbs and pruning standing trees.
Details maintenance tasks for the air filter and oiling port after each use.
Covers periodic checks and cleaning of the cooling system, spark arrester, and exhaust.
Explains how to clean or replace the fuel filter and service the spark plug.
Provides guidelines for sharpening saw chain cutters and setting standards.
Details when to sharpen chain teeth and how to use a depth gauge.
Explains how to maintain the guide bar, including checking for rail wear.
Helps diagnose and resolve engine starting problems and power loss.
Provides guidance on storing the chainsaw, especially regarding fuel.
Explains how to use the parts list and identify applicable serial numbers.
Shows a diagram of the power unit with numbered parts for identification.
Lists part numbers and descriptions for the power unit components.
Shows another diagram of the power unit with numbered parts.
Lists part numbers and descriptions for the power unit components.
Shows a diagram of the carburetor components with numbered parts.
Lists carburetor parts and accessories like bars, chains, and tools.
Explains emission control system warranty terms and owner responsibilities.
Details the limited warranty for chainsaws, including coverage periods and exclusions.
General| Displacement | 45.0 cc |
|---|---|
| Power Output | 2.2 kW (3.0 hp) |
| Ignition System | Electronic |
| Vibration Damping | Yes |
| Engine Type | 2-stroke |
| Oil Tank Capacity | 0.26 L |
| Guide Bar Length | 18 inches |
| Chain Pitch | 0.325 in |
| Chain Gauge | 0.050 inches |
