To Next PageTo Next Page
Need help?Do you have a question about the Zenoah GZ400 and is the answer not in the manual?
Explains the meaning of warning symbols used in the manual for safety and accident prevention.
Identifies the location of key components and parts of the chainsaw unit.
Provides detailed technical specifications for the GZ400 chainsaw model.
Instruction to read the operator's manual before operating the machine.
Mandates wearing head, eye, and ear protection during operation.
Advises using the chainsaw with two hands for better control.
Warns about the danger of kickback during chainsaw operation.
Emphasizes reading, understanding, and following all safety warnings.
Describes symbols indicating fuel, oil, choke, and adjustment points.
Details about emission control labels and compliance information for the engine.
Covers critical safety practices for operating the chainsaw, including personal protection.
Specific safety measures to prevent kickback incidents and ensure control.
Instructions on mounting and securing the SAFE-T-TIP anti-kickback device on the guide bar.
Details on the correct fuel and oil mixing ratio for the engine's lubrication.
Instructions for safely refueling the chainsaw, including essential precautions.
Detailed instructions for starting the engine, including choke and starter grip usage.
How to verify the chain oil supply system is functioning correctly.
Guidance on fine-tuning the carburetor for optimal performance under various conditions.
Explanation of the automatic and manual chain brake system and its operation.
Procedures for safely stopping the engine, including alternative methods if the switch fails.
Instructions for changing the operating mode, including anti-freeze mode.
Essential information and checks for preventing kickback during sawing operations.
Procedures and safety advice for felling trees with the chainsaw.
Safety precautions and techniques for cutting logs and branches.
How to cut logs resting on the ground safely and effectively.
Techniques for cutting logs that are suspended off the ground.
Safety advice for cutting limbs of fallen trees, including kickback awareness.
Instructions for pruning branches on standing trees, emphasizing safe posture.
Routine maintenance tasks to perform after each use of the chainsaw.
How to clean and maintain the air filter for optimal engine performance.
Maintenance steps for the oiling port and guide bar, including cleaning and greasing.
Maintenance for the air cooling system and cylinder fins to prevent overheating.
Checks for the spark arrester and exhaust port for carbon buildup.
Instructions for servicing the fuel filter and spark plug.
Inspection of the sprocket for wear and recommendations for replacement.
Instructions for mounting and checking the SAFE-T-TIP device on the guide bar.
Guidelines and criteria for sharpening chainsaw chain cutters, including angles and depth.
Recommendations for reversing the bar and checking the guide bar for wear.
Troubleshooting steps for engine starting failures, including checks for fuel and spark.
Solutions for issues with engine power, acceleration, and idling.
Steps to resolve problems where oil is not being delivered to the chain.
Instructions on how to properly store the chainsaw for extended periods to prevent damage.
Guidance on the proper disposal of the chainsaw, fuel, and oil according to local regulations.
Important notes regarding the use of genuine parts, ordering, and changes to the parts list.
Diagram and part numbers for the main power unit assembly.
Detailed list of part numbers and descriptions for the power unit.
Details the warranty period and coverage for small off-road engines.
Outlines the owner's responsibilities for required maintenance and warranty claims.
Schedule for emissions system maintenance and list of warranted parts.
Specifies parts related to emission control and their warranty coverage duration.
Details warranty coverage for all parts not related to emissions control.
Explains the meaning of warning symbols used in the manual for safety and accident prevention.
Identifies the location of key components and parts of the chainsaw unit.
Provides detailed technical specifications for the GZ400 chainsaw model.
Instruction to read the operator's manual before operating the machine.
Mandates wearing head, eye, and ear protection during operation.
Advises using the chainsaw with two hands for better control.
Warns about the danger of kickback during chainsaw operation.
Emphasizes reading, understanding, and following all safety warnings.
Describes symbols indicating fuel, oil, choke, and adjustment points.
Details about emission control labels and compliance information for the engine.
Covers critical safety practices for operating the chainsaw, including personal protection.
Specific safety measures to prevent kickback incidents and ensure control.
Instructions on mounting and securing the SAFE-T-TIP anti-kickback device on the guide bar.
Details on the correct fuel and oil mixing ratio for the engine's lubrication.
Instructions for safely refueling the chainsaw, including essential precautions.
Detailed instructions for starting the engine, including choke and starter grip usage.
How to verify the chain oil supply system is functioning correctly.
Guidance on fine-tuning the carburetor for optimal performance under various conditions.
Explanation of the automatic and manual chain brake system and its operation.
Procedures for safely stopping the engine, including alternative methods if the switch fails.
Instructions for changing the operating mode, including anti-freeze mode.
Essential information and checks for preventing kickback during sawing operations.
Procedures and safety advice for felling trees with the chainsaw.
Safety precautions and techniques for cutting logs and branches.
How to cut logs resting on the ground safely and effectively.
Techniques for cutting logs that are suspended off the ground.
Safety advice for cutting limbs of fallen trees, including kickback awareness.
Instructions for pruning branches on standing trees, emphasizing safe posture.
Routine maintenance tasks to perform after each use of the chainsaw.
How to clean and maintain the air filter for optimal engine performance.
Maintenance steps for the oiling port and guide bar, including cleaning and greasing.
Maintenance for the air cooling system and cylinder fins to prevent overheating.
Checks for the spark arrester and exhaust port for carbon buildup.
Instructions for servicing the fuel filter and spark plug.
Inspection of the sprocket for wear and recommendations for replacement.
Instructions for mounting and checking the SAFE-T-TIP device on the guide bar.
Guidelines and criteria for sharpening chainsaw chain cutters, including angles and depth.
Recommendations for reversing the bar and checking the guide bar for wear.
Troubleshooting steps for engine starting failures, including checks for fuel and spark.
Solutions for issues with engine power, acceleration, and idling.
Steps to resolve problems where oil is not being delivered to the chain.
Instructions on how to properly store the chainsaw for extended periods to prevent damage.
Guidance on the proper disposal of the chainsaw, fuel, and oil according to local regulations.
Important notes regarding the use of genuine parts, ordering, and changes to the parts list.
Diagram and part numbers for the main power unit assembly.
Detailed list of part numbers and descriptions for the power unit.
Details the warranty period and coverage for small off-road engines.
Outlines the owner's responsibilities for required maintenance and warranty claims.
Schedule for emissions system maintenance and list of warranted parts.
Specifies parts related to emission control and their warranty coverage duration.
Details warranty coverage for all parts not related to emissions control.
Power Unit| displacement | 40.1 cm3 |
|---|---|
| fuel tank capacity | 310 cm3 |
| oil tank capacity | 210 cm3 |
Engine Specifications| power | 1.77 kw/min |
|---|---|
| max speed | 12, 000 min[-1] |
| idle speed | 2, 700 min[-1] |
Weight and Dimensions| dimensions | 370 x 235 x 270 mm |
|---|---|
| dry weight of power unit | 4.60 kg |
| usable cutting lengths | 370 mm |
