Need help?Do you have a question about the Zenoah GZ4000 and is the answer not in the manual?
Explains various safety symbols and warnings related to chainsaw operation and hazards.
Highlights the critical need for hearing protection due to high sound levels.
Details the manufacturer, model, and compliance with relevant directives and regulations.
Outlines the CE certificate number and its validity for the product.
Covers essential safety rules for operating the chainsaw, including personal protective equipment and work area preparation.
Details kickback hazards and essential precautions to avoid injury from chain saw kickback.
Explains the negative effects of vibration on the body and how to minimize exposure.
Provides instructions on how to properly dispose of the chainsaw and related materials according to regulations.
Identifies the ports for refueling gasoline and topping up chain oil.
Explains symbols for engine start/stop, choke, and carburetor adjustment screws.
Shows symbols for chain brake release and activation, and chain oil flow adjustment.
Illustrates the power unit, guide bar, saw chain, and necessary tools for installation.
Details the process of attaching the guide bar and saw chain to the power unit.
Explains how to properly tension the saw chain and secure the components.
Provides recommendations for fuel type, mixing ratio, and safe fueling procedures.
Specifies the recommended motor oil grades for the chain oil reservoir.
Details the steps for filling tanks, setting the switch, and using the choke for engine ignition.
Explains how to verify the chain oil flow after starting the engine.
Guides on fine-tuning the carburetor settings for optimal engine performance.
Explains the mechanism to prevent carburetor icing in cold, humid conditions.
Details the automatic and manual operation of the chain brake and its importance.
Provides the correct procedure for safely shutting down the engine.
Covers preliminary checks, proper sawing pressure, and handling a caught chain.
Explains the function of the chain brake and the importance of checking it before use.
Details the steps for felling a tree, including notch cuts and felling cuts.
Provides guidance on cutting logs and limbs, considering log rolling and bending forces.
Covers cleaning the air filter, checking the oiling port, and inspecting the guide bar.
Highlights periodic checks for cylinder fins and other critical components.
Details the maintenance for the fuel filter and cleaning/adjusting the spark plug.
Explains how to check the sprocket for wear and the importance of matching new parts.
Provides standards and procedures for sharpening the saw chain cutters.
Covers reversing the bar, checking rail squareness, and identifying wear.
Lists common causes and solutions for engine starting failures.
Addresses issues related to lack of power, poor acceleration, and rough idling.
Provides guidance on troubleshooting when chain oil does not flow correctly.
Lists detailed technical specifications for the power unit and cutting head components.
Outlines the warranty period, coverage, exclusions, and limitations.
Explains various safety symbols and warnings related to chainsaw operation and hazards.
Highlights the critical need for hearing protection due to high sound levels.
Details the manufacturer, model, and compliance with relevant directives and regulations.
Outlines the CE certificate number and its validity for the product.
Covers essential safety rules for operating the chainsaw, including personal protective equipment and work area preparation.
Details kickback hazards and essential precautions to avoid injury from chain saw kickback.
Explains the negative effects of vibration on the body and how to minimize exposure.
Provides instructions on how to properly dispose of the chainsaw and related materials according to regulations.
Identifies the ports for refueling gasoline and topping up chain oil.
Explains symbols for engine start/stop, choke, and carburetor adjustment screws.
Shows symbols for chain brake release and activation, and chain oil flow adjustment.
Illustrates the power unit, guide bar, saw chain, and necessary tools for installation.
Details the process of attaching the guide bar and saw chain to the power unit.
Explains how to properly tension the saw chain and secure the components.
Provides recommendations for fuel type, mixing ratio, and safe fueling procedures.
Specifies the recommended motor oil grades for the chain oil reservoir.
Details the steps for filling tanks, setting the switch, and using the choke for engine ignition.
Explains how to verify the chain oil flow after starting the engine.
Guides on fine-tuning the carburetor settings for optimal engine performance.
Explains the mechanism to prevent carburetor icing in cold, humid conditions.
Details the automatic and manual operation of the chain brake and its importance.
Provides the correct procedure for safely shutting down the engine.
Covers preliminary checks, proper sawing pressure, and handling a caught chain.
Explains the function of the chain brake and the importance of checking it before use.
Details the steps for felling a tree, including notch cuts and felling cuts.
Provides guidance on cutting logs and limbs, considering log rolling and bending forces.
Covers cleaning the air filter, checking the oiling port, and inspecting the guide bar.
Highlights periodic checks for cylinder fins and other critical components.
Details the maintenance for the fuel filter and cleaning/adjusting the spark plug.
Explains how to check the sprocket for wear and the importance of matching new parts.
Provides standards and procedures for sharpening the saw chain cutters.
Covers reversing the bar, checking rail squareness, and identifying wear.
Lists common causes and solutions for engine starting failures.
Addresses issues related to lack of power, poor acceleration, and rough idling.
Provides guidance on troubleshooting when chain oil does not flow correctly.
Lists detailed technical specifications for the power unit and cutting head components.
Outlines the warranty period, coverage, exclusions, and limitations.
Power Unit| displacement | 40.1 cm³ |
|---|---|
| fuel tank capacity | 310 cm³ |
| oil tank capacity | 210 cm³ |
| power | 1.88 kW/min |
| max speed | 13, 000 min⁻¹ |
| idle speed | 2, 700 min⁻¹ |
Cutting Head| guide bar size | 14 in (350 mm), 16 in (400 mm) |
|---|---|
| saw chain pitch | 0.325 in (8.26 mm) |
| saw chain gauge | 0.05 in (1.27 mm) |
Weight and Dimensions| dimensions | 370 x 235 x 270 mm |
|---|---|
| dry weight | 4.3 kg |
To Next Page
