Zenoah G430RC - Carburetor Maintenance; Ignition System Maintenance

12
MAINTENANCE
4) CARBURETOR
Items Standard Limit Measuring Device Remarks
Metering Lever set (mm) 1.5 ± 0.16 Vanier
Inlet Valve Opening Pressure (kg/cm
2
) 1.3~2.3 — Leak Tester
Inlet Valve Closing Pressure (kg/cm
2
) 0.6~1.6 — Leak Tester
5) IGNITION SYSTEM
Items Standard Limit Measuring Device Remarks
Spark Plug Air Gap (mm) 0.6~0.7 0.7 Thickness Gauge
Primary 2800 — Volt Meter
Secondary 8400 — Volt Meter
Reading between
primary terminal and
iron core.
Reading between
sparking cord end and
iron core.
Coil
Resistance
(Ω)