ZEPCAM T2 Quick Start Manual

T2 BODYCAM
QUICK START MANUAL
T2QS.1.1EN
POWER ON
Push button 1 for 3 secondes.
START RECORDING
Push button 1 (2 beeps).
STOP RECORDING
Push button 1 for 2 seconds.
(2 beeps, indicator 3 is green).
TAKE A PICTURE
Push button 2
TAKE A PICTURE WHILE RECORDING
Push button 1 or 2 (1 beep).
PRE - RECORDING
Red led flashes 2 times when powered on
POWER OFF
(when the indicator 3 is green)
Push button 1 for 3 seconds
1
2
3
Green light
Power on, in standby
mode, Not recording
Red light
One flash a picture is
taken
Red light
Recording video
Light
Charging

ZEPCAM T2 Specifications

General

Storage Capacity	64 GB
Connectivity	Wi-Fi, Bluetooth
Category	Security Camera
Frame rate	30 fps
Waterproof rating	IP67
Resolution	1920 x 1080