Need help?Do you have a question about the ZEPCAM T2+ and is the answer not in the manual?
Details physical parts of the Zepcam T2+ bodycam.
Outlines technical specifications and features of the Zepcam T2+ bodycam.
Explains how to turn the Zepcam T2+ on and off using the main button.
Details how to start/stop recording and take pictures with the bodycam.
Describes the pre-recording mode where video is buffered before actual recording.
Instructions on how to reset the Zepcam T2+ bodycam.
Explains the meaning of different LED light signals on the Zepcam T2+ bodycam.
Instructions on how to charge the Zepcam T2+ using the provided single docking station.
Information on charging the Zepcam T2+ using multi-docking stations.
Details the PC software for managing a single T2+ bodycam.
Describes the web-based software for evidence management and multiple cameras.
Explains how docking stations facilitate data offload for multiple cameras.
Steps to resolve issues when the T2+ bodycam is unresponsive to button presses.
Troubleshooting steps for docking station errors indicated by flashing LEDs.
Procedure for factory resetting the Zepcam docking station as a last resort.
General| Video Resolution | 1080p |
|---|---|
| Frame rate | 30 fps |
| GPS | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Sensor Type | CMOS |
| Storage | Internal |
| Battery Type | Lithium-ion |
| Camera Type | Body Worn Camera |
| Lens Type | Fixed |
| Aperture | F2.0 |
To Next Page
