What to do if my Zephyr Accessories appliance does not operate?
If your Zephyr appliance isn't working, first ensure it's properly plugged into a functioning power outlet and that the appliance is turned on. Also, check if the circuit breaker has tripped or a fuse has blown, and replace it if necessary. Finally, check the Operating Your Appliance section to verify if Sabbath mode is disabled.
Why my Zephyr Accessories appliance is not cold enough?
Your Zephyr appliance may not be cold enough due to several reasons. The temperature control setting might be too high, so try adjusting it to a cooler setting. The external environment could be affecting it, so keep the appliance away from sunshine or heat sources. Also, ensure you're not opening the door too frequently or for extended periods and check that the door gasket is properly sealed. Finally, check the Operating Your Appliance section to verify if Demonstration mode is disabled. Ensure sufficient ventilation and avoid overfilling to allow proper airflow.
Why does my Zephyr Accessories appliance turn on and off frequently?
If your Zephyr appliance is turning on and off frequently, it could be due to several factors. The room temperature might be hotter than normal, so ensure the refrigerator is running at the appropriate ambient temperature. Check that the door gasket is properly sealed and that the door is completely closed. You should also read and follow the “Installation Clearance Requirements” in the Installation Instructions section.
General| Brand | Zephyr |
|---|---|
| Model | Presrv PRB24C01CG |
| Category | Accessories |
| Language | English |
To Next Page
