19
PRB24C01CG Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
5. Remove the door magnet (5) and child
safety lock catch (6) by 2 screws each
and reinstall them to the opposite end
of the door.
6. Mount the door over the door hinges,
making sure the door magnet and
child safety lock catch are both facing
down.
7. Once the door is aligned, tighten the
2 screws removed from step 2 at both
the top and bottom corners and place
the black plastic cap, marked A, to the
lower left corner and the cap, marked
B, to the upper left corner.
8. Reinstall the rubber door seal. Ensure
the door closes tightly and there are no
gaps around the seal.
5
6
5
6
To Next Page
Loading...
Need help?
General
