What to do if my Zepter NEB-01-C Respiratory Product does not work when turned on?
If your Zepter Respiratory Product isn't working, first, check if the nebulizer is charged. If the blue and green indicators are constantly on, recharge the device. Second, ensure the medication cup is fully filled.
Why is my Zepter Respiratory Product nebulizing so low?
Low nebulization in your Zepter Respiratory Product can occur for several reasons. First, verify that the medication cup is filled with the correct water-soluble and non-corrosive medication and that there is enough liquid. Second, tilt the unit to ensure the medication contacts the spray mesh. Finally, the spray mesh might be blocked; if so, put 2-3 drops of white vinegar with 3-6 ml of water into the medication cup to clean and disinfect it for the next use.
What is the special care for babies and children when using Zepter NEB-01-C Respiratory Product?
When using the Zepter Respiratory Product for babies and children, use the baby mask or the kid's mask to cover their mouth and nose for better effect. Note that children and babies should be helped and watched by an adult during use, and the device should be kept away from children when not in use.
What to do if I see medication residue in my Zepter NEB-01-C Respiratory Product?
It is normal to see medication residue in your Zepter Respiratory Product. However, if there is a strange noise or the unit shuts off due to insufficient medication, stop the nebulization.
The device is a mesh nebulizer for inhalation therapy, suitable for pediatric and adult patients.
Lists the items included in the product packaging: nebulizer, medication cup, spray nozzle, USB cable.
Provides a schematic diagram and labels for the main unit and its components.
Steps to prepare the appliance before its initial operation, including unpacking and charging.
Illustrates how to connect the medication cup, mask, or mouthpiece to the main unit.
Details the process of charging the device, including indicator lights and power requirements.
Explains the meaning of various indicator lights and their corresponding device states.
Step-by-step guide on how to perform nebulization, including adding liquid and operating the device.
Instructions for cleaning the main unit and its removable components after use.
Methods for disinfecting components using hydrogen peroxide or ethanol.
General| Brand | Zepter |
|---|---|
| Model | NEB-01-C |
| Category | Respiratory Product |
| Language | English |
To Next Page