After doing this, you can then connect your device to the wireless router's Wi-Fi network. If the wireless router is in its
default setting, the network name (SSID) and password should be found on the bottom of the router somewhere.
On your device, tap the Settings app -> Wi-Fi -> Choose the Wireless router from the list of available networks. You
will then need to enter your router's password (Network Key).
Open the app
When you have connected your device to the router and enabled the Remote on the console, open the ZerOS Remote
or ZerOS Monitor app on your device. Your console should appear in the list.
The bottom bar allows you to select different windows to view and control from the app.
This picture shows the ZerOS Remote app on iPhone, with detected
consoles shown in the list.
This picture shows the ZerOS Monitor app on iPad, with detected
consoles shown in the list.
You can then click on your console to connect. If your console has a password, you can then enter this to connect to
your console. By default the password is "zeros" however you can change this on the console, or disable
the password.
Zero 88 - ZerOS - Page 215 of 233 Printed: 23/11/2020 12:50:03 JH
To Next Page
Loading...
Need help?
General
