ZerOS Wing
Setup
ZerOS Wing has been designed to be simple and quick to setup and use. There are no settings, no configuration and
no difficult connections. Just plug in via USB and any ZerOS console, or Phantom ZerOS on PC, and it is instantly
upgraded.
It is always recommended to ensure your console is running the latest software. You must be running ZerOS 7.9.2 or
later to use ZerOS Wings.
Operation
A single button switches quickly between ‘Channels’ and ‘Playbacks’ at any time, and the ‘Page Up’ and ‘Page Down’
buttons are used to either switch between all patched channels on the console, or each page of playbacks. When
multiple wings are used, simply setup each Wing onto a different page.
Using ZerOS Wing with FLX
ZerOS Wing has been designed to complement the aesthetic and physical design of the FLX lighting console.
Accessories are available to raise ZerOS Wing behind FLX and mechanically connect ZerOS Wing to the side of a
FLX console, or to another ZerOS Wing. Up to six ZerOS Wings can be used simultaneously with FLX or ZerOS
Server. A maximum of one ZerOS Wing can be mechanically connected to either side of the FLX lighting console, and
up to four ZerOS Wings can be mechanically connected together and placed behind FLX, as shown.
Zero 88 - ZerOS - Page 29 of 233 Printed: 23/11/2020 12:50:03 JH
To Next Page
Loading...
Need help?
General
