Need help?Do you have a question about the Zero B ultimate and is the answer not in the manual?
General| Brand | Zero B |
|---|---|
| Model | ultimate |
| Category | Water Filtration Systems |
| Language | English |
Removes larger particles like dust and sand above 20 microns.
Filters sediments and impurities using a 5-10 micron polypropylene fiber.
Removes chlorine, organic impurities, color, and odor; inhibits bacteria.
Rejects TDS, chemicals, metals, bacteria, and viruses with 0.0001 micron pores.
Provides 100% germicidal protection and backup safety.
Purifies water using Reverse Osmosis technology.
Eliminates salts, bacteria, viruses, chemicals, and metals.
Unit operates automatically with low pressure.
Product water meets USEPA and IS 10500 standards.
Manages water pressure and tank fill levels.
Periodically flushes membrane for longevity.
Protects pump from voltage/current surges.
Offers 100% germicidal protection.
Inspect for damage, verify pressure, connect fittings.
Ensure correct drain routing and power setup.
Check connections and for leaks after starting water.
Verify water quality, odour, and TDS levels.
Install in a dry place, away from heat/sunlight.
Ensure all hydraulic fittings are tight.
Unit needs sufficient ventilation; avoid closed environments.
230V±10%, 5A socket with earthing; consider stabilizer.
Specific water line pressure and drainage distance needed.
Fill tank to flush RO Membrane after installation.
Drain and refill tank to prepare for operation.
Replace pre-filter, sediment, BAC, RO/Resin Carbon as recommended.
Wipe outer body with mild cleaner.
Clean when tank filling exceeds 90 min or every 15 days.
Steps to open housing, remove, rinse, and reassemble cartridge.
Provides physical size (LWH) and unit weight.
Specifies the purified water output capacity per hour.
Details inlet pressure and maximum TDS for optimal operation.
Indicates salt rejection percentage and pure water recovery rate.
Specifies voltage, frequency, and power consumption.
Lists filter types (Sediment, RO, Resin Carbon) and indicator LEDs.
Lists limiting values for TDS, suspended solids, turbidity, hardness, etc.
Specifies limits for chlorine, silica, heavy metals, iron, oil, and grease.
Defines the maximum acceptable water temperature.
Includes switching off during vacation, calling service, using genuine parts.
Includes avoiding direct sunlight, hot water, and placing heavy objects.
Addresses causes like dirty tank, old water, or exhausted filters.
Covers causes like closed valve, no supply, choked filters, or low temperature/power.
Details manufacturing defect coverage, installation requirements, and exclusions.
Procedure to register details for free service within one month of purchase.
The company offers a one-year warranty for the Zero B Ultimate.
Option to enter into an AMC after the warranty expires.
Contact Zero B Customer Care for service and complaints.
To Next Page
