To Next PageTo Next Page
Need help?Do you have a question about the Zero Zero HOVERAir X1 and is the answer not in the manual?
Scan the QR code to download and install the Hover X1 mobile application.
Charge the HoverAir X1 before first use; LEDs indicate charging status.
Press and hold the power button for 2 seconds until the status indicator lights green.
Select flight mode by short-pressing the mode button and initiate takeoff.
Stop propellers by pressing the power button or flipping the drone 180 degrees mid-flight.
Connect the drone to the Hover X1 app via Bluetooth and Wi-Fi for control.
Avoid inserting fingers or objects into the propeller area; consult the safety manual.
Scan the QR code to download and install the Hover X1 mobile application.
Charge the HoverAir X1 before first use; LEDs indicate charging status.
Press and hold the power button for 2 seconds until the status indicator lights green.
Select flight mode by short-pressing the mode button and initiate takeoff.
Stop propellers by pressing the power button or flipping the drone 180 degrees mid-flight.
Connect the drone to the Hover X1 app via Bluetooth and Wi-Fi for control.
Avoid inserting fingers or objects into the propeller area; consult the safety manual.
General| Weight | 125 g |
|---|---|
| Max Flight Time | Up to 11 minutes |
| Camera Resolution | 12 MP |
| Operating Frequency | 2.4 GHz |
| Operating Temperature | 0°C to 40°C |
| Internal Storage | 32 GB |
| GPS | No |
| Obstacle Avoidance | No |
| Follow Me Mode | Yes |
| Gesture Control | Yes |
| App Compatibility | iOS and Android |
