Glossary JesterML Operating Manual
73-406-00 Issue 3.0 73 of 85
LTP
Latest Takes Precedence. The mixing law used for fixture colour, beamshape and
position channels, and grabbed DMX input. This means that activating a memory,
submaster or palette will take control of programmed LTP channels regardless of the
previous level.
Memory
A block of storage data containing information about all of the JesterMLs channels.
The JesterML has capacity for 500 memories.
Memory Master
The master fader which controls the overall intensity level of the memory stack.
Memory Stack
See Playback.
Memory Stick
Another name for a Flash Disk.
MIDI
Musical Instrument Digital Interface. A MIDI signal from a MIDI instrument or other
MIDI device can be used to control the JesterML.
Monitor
A VGA monitor port is provided on the JesterML as standard. You can use the desk
without a monitor, but it’s much easier to use with a monitor connected.
Movement Effect
The JesterML can generate a number of movement effects for fixtures which have
Pan & Tilt parameters.
MSC
MIDI Show Control. A standard protocol published by the MIDI Manufacturers
Association.
MSD
Mass Storage Device. See Flashdisk.
Mode
The button which defines which mode the JesterML is in.
Modifiers
The options available within a chase: Attack, Direction and Speed.
Multi-Function-Key
The JesterML has 10 of these, which change function depending on whether
CHASES, SPECIAL, FIXTURES, COLOUR, BEAMSHAPE or POSITION is selected.
The function of each button is indicated on the LCD above it. These keys may be
To Next Page
Loading...
Need help?
General