JesterML Operating Manual Glossary
78 of 85 73-406-00 Issue 3.0
Setup
The area of the JesterML where settings can be altered. This is accessed via
SHIFT+MODE.
Shift Button
An important button on the JesterML. The SHIFT button provides access to
additional functionality.
Size X/Y
The X and Y size of a Movement Effect. The X and Y size of a Movement Effect are
controlled by the wheels when the appropriate POSITION wheel group is selected for
a fixture with Pan & Tilt. Setting one of these to 0 on an Ellipse effect creates a
horizontal or vertical line.
Slider
See Fader.
Snap
A fade which happens instantly.
Snapshot
A mode of the DMX Input, where the instantaneous levels of all 512 DMX channels
are stored into the memory or submaster being recorded.
Solo
A channel is at full intensity (subject to the Grand Master) and all other intensity
channels are turned off. This is a temporary action generally associated with a flash
button.
Sound2Lite
The ability to control lights in time to a beat. The JesterML has a sound2lite input
which listens to the input music and, according to the settings of the chase, changes
the lights in time to the beat.
Special Button
This turns the Multi-Function-Keys and Wheels into controls for fades. In RUN Mode,
the Flash Mode setting is also here.
Speed
Chase speed is controlled by the wheels when CHASES is selected.
Movement Effect speed is controlled by the wheels when the appropriate POSITION
wheel group is selected for a fixture with Pan & Tilt.
Stack
See Playback.
To Next Page
Loading...
Need help?
General