INFINITY ID2 USER MANUAL, MAINTENANCE GUIDE & LOG BOOK Software Versions: PANEL 0.X ā R8629 & LOOP 0.J-R624
Approved Document No: GLT2-211-7-2 PAGE 1
Issue 1.00 Author: NRPJ Date: 23/1/2013
TABLE OF CONTENTS
WHAT TO DO IF THE FIRE ALARM PANEL SHOWS AN ALARM (RED LED) .............................................. 2
WHAT TO DO IF THE FIRE ALARM PANEL SHOWS A FAULT (YELLOW LED) ............................................ 2
1. FIRE ALARM CONTROL PANEL SAFETY ISSUES ................................................................................... 3
2. THE PURPOSE OF A FIRE ALARM SYSTEM .......................................................................................... 3
3. USER RESPONSIBILITIES & MAINTAINENCE OF THE FIRE ALARM SYSTEM, INCLUDING THE FACP &
ITS INTEGRAL PSE ................................................................................................................................... 4
4. PANEL INDICATIONS & CONTROLS ..................................................................................................... 5
4.1 PANEL INDICATIONS .................................................................................................................... 5
4.2 PANEL CONTROLS ........................................................................................................................ 5
4.3 IN THE EVENT OF AN ALARM ...................................................................................................... 5
4.4 ACCESS LEVELS............................................................................................................................. 5
4.5 CHECKING THE PANELS INDICATION LEDS ................................................................................... 6
4.6 WHAT THE LEDS MEAN ................................................................................................................ 6
5. THE FIRE CONDITION.......................................................................................................................... 7
5.1 HOW THE SIMPLICITY INDICATES AN ALARM ............................................................................. 7
5.2 TO TURN OFF THE ALARM SOUNDERS ........................................................................................ 7
5.3 A SECOND ALARM SIGNAL FROM A NEW DETECTION ZONE ...................................................... 7
5.4 TURNING ON THE ALARM SOUNDERS FROM THE FACP (I.E. TO EVACUATE THE BUILDING). .... 7
5.5 RESETTING THE PANEL................................................................................................................. 7
6. THE FAULT CONDITION ....................................................................................................................... 8
6.1 DIFFERENT TYPES OF FAULT......................................................................................................... 8
6.2 WHAT TO DO IF A FAULT CONDITION OCCURS ............................................................................ 9
6.3 OTHER LED INDICATIONS ........................................................................................................... 10
7. DISABLEMENTS ................................................................................................................................. 11
7.1 REASONS FOR DISABLING CERTAIN PARTS OF A FIRE ALARM SYSTEM ..................................... 11
7.2 TO DISABLE A ZONE AND/OR EXTERNAL SOUNDERS ................................................................ 11
7.3 TO ENABLE A ZONE AND/OR EXTERNAL SOUNDERS ................................................................. 11
8. SYSTEM DESCRIPTION ...................................................................................................................... 12
9. FIRE ALARM LOG BOOK .................................................................................................................... 14
ALL EVENTS OTHER THAN MAINTENANCE WORK OR FALSE ALARMS (CONTINUED)..................... 20
10. COMMISSIONING THE SYSTEM, INCLUDING POWER SUPPLY EQUIPMENT P.S.E. ......................... 21
10.1 DESIGN, INSTALLATION & COMMISSIONING CERTIFICATES .................................................... 21
To Next Page
Loading...