248
INDEX
Limitation of the upper position of the three-point hitch 126
Limiting pull rods 141
List of lamps 167
Loading capacity of front tyres 231
Loading capacity of rear tyres 232
Location of serial numbers 5
Locking control levers 133
Locking control levers 116
Longitudinal adjustment 35
Lower pull bars with extensible terminals 143
Lower pull bars with hooks CBM 143
Lowering speed 127
Lubrication and filling points of the front driving axle 204
M
Main dimensions of the tractor (mm) 224
Maintenance and care for tyres 208
Maintenance instructions 189
Maintenance of dry air cleaner – indicator of clogging 194
Maintenance of the air-conditioning (a/c) system 207
Maintenance of the alternator 162
Maintenance of the battery 161
Manipulation with the starter 64
Manual setting of control of three-point hitch 128
Maximum permitted vertical static loading of hitches for trailers
and semi-trailers 91
Maximum transferred power 98
Maximum weight of fluid (kg) according to dimensions of tyres 157
Mechanical hydraulics 107
Mixed regulation of lifting the rear three-point hitch 113
Modular system of hitches for trailers and semi-trailers 87
Moving off 73
Mudguards of the front driving axle 151
Multi-level quick-adjustable hitch CBM 86
N
Non-freezing solution for filling of tyres 157
O
Oil filling, inspection and drain holes of front wheel reducers 204
Oil for hydrostatic steering for tractors 178
Oils for front drive axle 178
Oils for front output shaft 176
Oils for tractor transmission gearing 177
Oils for tractor transmission gearing 177
Oils for zetor engines which are equipped with diesel particle
filter 175
Oils for zetor engines which are not equipped with diesel particle
filter 176
Opening of doors from inside 29
Opening of doors from outside 29
Operation of heating of air-conditioning with work of the tractor 41
Operations carried out after every 100 hours of work 170
Operations carried out after every 50 hours of work 170
Operations carried out after every 500 hours of work 171
Operations carried out daily before beginning of work 170
Operations carried out outside the interval of 500 hours of work 172
Outer contour and track wheeling diamater 240
Outer hydraulic circuit 133
Outer hydraulic circuit 114
Outer hydraulic circuit controls 134
Outer hydraulic circuit controls 115
Overhaul in proxima tractors 188
P
Passenger´s seat 34
Pedals 56
Permitted combinations of wheels for tractors 233
Permitted max. Loading of front axle (kg) 229
Permitted max. Loading of rear axle (kg) 229
Permitted maximum weight of vehicle set ”tractor + mechanism“
(kg) 230
To Next Page
Loading...
Need help?
General