Need help?Do you have a question about the Zetor Proxima GP Series and is the answer not in the manual?
Perform daily or after every 8-10 hours of operation.
Check fuel system, including tank, for leaks and repair immediately.
Check oil quantity in engine and lubrication system for leaks. Maintain level.
Check cooling system connections for leaks and coolant quantity.
Information regarding the safety cab and its protective frame.
Instructions on how to open the tractor cab doors from the exterior.
Details on operating the internal door opening mechanism.
Explanation of various indicator lamps on the instrument panel.
Step-by-step procedure for safely starting the tractor engine.
Warnings against improper engine starting methods.
Information on the front hook for towing.
Details on adjusting the multistage suspension.
Instructions for adjusting and removing the CBM stage hitch.
Guidelines and safety for operating the PTO shaft.
Procedure to set the rear PTO shaft speed display.
Overview of the tractor's hydraulic system components.
Description of the controls for the hydraulic system.
Location and description of the hydraulics control panel.
Explanation of different methods to control the rear three-point hitch.
Details on the functions of the electro-hydraulic control elements.
Procedure for deactivating the electro-hydraulic system.
Information on the rear three-point hitch categories and dimensions.
Instructions for adjusting front wheel track with front drive axle.
Details on mounting weights in front of the bonnet.
Information on weights for the front three-point hitch.
Specifications for mounting weights on rear wheels.
Procedure and warnings for filling tyre tubes with liquid.
General information about the tractor's electrical system.
Details on the tractor's accumulator battery.
Schedule and scope of regular service inspections.
Daily checks before starting tractor operation.
Checks to perform after the engine has been started.
Maintenance tasks required every 50 operating hours.
Maintenance tasks required every 100 operating hours.
Maintenance tasks required every 500 operating hours.
Procedure for opening and closing the tractor's front bonnet.
Instructions for checking engine oil levels.
Steps for draining engine oil.
Procedure for checking and adjusting cogged belt tension.
Instructions for adjusting the V-belt tension for the AC compressor.
Key physical dimensions of the tractor in millimeters.
To Next Page
General