Display - change of displa
P18N041
By repeated pressing of buttons (C) and (D) you can click between individual displays of data on the display
(so called screens). Press the button (C) or (D) for longer time to initiate automatic switching between
individual screens which is performed while you keep the button pressed.
When the key in the switch box is moved to position I, the
home screen is displayed on the display.
C15N030
fter about three seconds the main screen is displayed on
the display.
1 - total operating hours (the value cannot be reset)
2 - operating hours of the tractor since the last reset of the
value
3 - total distance covered (the value cannot be reset)
4 - distance covered by the tractor since the last reset of
the value
P18N043
There are data regarding automatic switching off of the
rear PTO shaft; more information in the chapter Power of
Agricultural Machines.
PHS18N020
To Next Page
Loading...
