Shifting road and reduced speeds
Torque multiplier
Indication of the multiplier function
H - road speeds
N - neutral
L - reduced speeds
Shifting of gears of the main gearbox with reduced speeds
is the same as with road speeds.
Considering low speed of the tractor, change nearly
always means moving off from rest.
Shifting using the lever of road and reduced
speeds is only possible when the tractor is in
standstill.
p18n060
The two-speed multiplier is standard on all tractor types.
The shifting of gears of the two-speed multiplier is
controlled by two buttons on the main gearshift knob.
This is done by pressing the corresponding button without
pressing the clutch pedal. The actual shifting of the
multiplier speeds is automatic even if the tractor is loaded.
Torque multiplier gear shifting:
Arrow up - to increase ground speed
Arrow down - to decrease ground speed
Note:When the tractor engine is started or stopped,
a higher gear is always automatically engaged (arrow up).
PHS18N033
The individual engaged gears of the multiplier are
indicated by the symbol (1) on the instrument panel
display.
2 Hi
her
ear
fast
1 Lower
ear
slow
PHS18N034
To Next Page
Loading...
Need help?
General