Need help?Do you have a question about the Zetor Proxima HS 100 and is the answer not in the manual?
General| Engine Power | 100 HP |
|---|---|
| Displacement | 4.156 L |
| Number of Cylinders | 4 |
| Hydraulic System | Open center |
| PTO Power | 85 HP |
| PTO Speed | 540/1000 RPM |
| Fuel Tank Capacity | 150 L |
| Max Speed | 40 km/h |
| Gears | 24 forward / 24 reverse |
General rules for safe operation, clothing, starting, and driving the tractor.
Explains the function and meaning of all signal lamps and warning indicators on the instrument panel.
Details on the tractor's gauges, main display, and how to customize its view and data.
Information on service intervals, error codes, system diagnostics, and manual brake status.
Details on DPF operation, regeneration, and error indications.
SCR system requirements, prohibition of operation without it, urea handling, and error display.
Procedures for safe pre-operation checks, engine starting, and initial warm-up.
Methods for controlling tractor movement, clutch engagement, and direction changes.
Safety and operational advice for various driving conditions, brakes, and system warnings.
Guidelines for breaking in the new tractor during the first 100 operating hours.
Safe operation, control, and display of PTO shaft speeds.
Introduction to the tractor's hydraulic system and its control panel.
Operation of the rear three-point hitch using mechanical controls and adjustments.
Explains position, power, and mixed regulation for lifting the rear three-point hitch.
Methods for setting and controlling the three-point hitch, including manual and automatic modes.
How EHR-B system errors are indicated, described, and diagnosed, including outer circuit controls.
Guidelines for replacing fluids and filters, including specifications for oils, fuels, and lubricants.
Specifications for axle loads, tire capacities, wheel combinations, and maneuverability.
Data on tractor travel speeds, tensile force, and load limit calculations.
To Next Page