Zetor Proxima 80 2012

General rules and regulations for safe tractor operation and user conduct.

Procedures and warnings related to starting the tractor engine safely.

Key operational safety instructions for driving and using the tractor.

Guidelines and measures to prevent fires involving the tractor.

Daily checks and maintenance tasks for ensuring tractor operability.

Safety instructions related to the tractor's electrical system and components.

Procedure for checking and maintaining the engine oil level.

Checking brake fluid levels and system tightness for safe braking.

Checking oil levels and hoses in the hydrostatic steering system.

Overview and description of the tractor's dashboard instruments.

Selecting PTO operation and adjusting PTO speed for implements.

Step-by-step procedure for starting the tractor engine.

Troubleshooting steps if the engine fails to start.

Safety warnings and correct procedures for using the motor starter.

Step-by-step guide for setting the tractor in motion.

General procedures for changing gears in the tractor.

How to select forward or reverse drive direction using the reversor lever.

Engaging and disengaging the differential lock for traction.

Information on the tractor's service brake system and pedal operation.

Understanding the warning signal for air pressure drops in the brake system.

Proper use of the parking brake for stopping the tractor.

Correct procedure for stopping the tractor engine.

Safe procedures for leaving the tractor unattended.

Recognizing and responding to hydrostatic steering failure warnings.

General critical warnings for tractor operation and maintenance.

Fundamental principles for breaking in a new tractor for the initial 100 hours.

Specific tasks and considerations during the initial 100 operating hours.

General operation procedures for the PTO shaft.

How to operate the PTO shaft clutch control lever.

Controls for adjusting PTO shaft speed.

PTO speed control for specific tractor configurations.

Overview of the tractor's hydraulic system and its circuits.

Location and function of the hydraulics control panel.

Three methods for regulating the rear three-point hitch.

Detailed controls for the inner hydraulic circuit.

Adjusting the speed at which the three-point hitch lowers.

Maintaining the tool at a set height using position regulation.

Adjusting hitch lift based on soil resistance for consistent tilling depth.

Combining position and power regulation for optimal performance.

Operation of the controls for the outer hydraulic circuit.

Understanding the functions of outer hydraulic circuit control levers (lever 'a').

Understanding the functions of outer hydraulic circuit control levers (lever 'b').

Understanding the functions of outer hydraulic circuit control levers (lever 'c').

Functions of outer hydraulic circuit levers for a one-section distributor.

Guidelines for connecting external machinery to the hydraulic circuit.

Description and specifications of the rear three-point hitch.

Safety precautions when working with implements attached to the three-point hitch.

Description of the front three-point hitch for front-mounted implements.

Operation of the front three-point hitch using hydraulic cylinders.

Crucial information for connecting and handling the tractor battery.

Procedures for cleaning, fixing, and maintaining the battery.

Daily checks before starting tractor operations.

Maintenance tasks to be performed every 50 operating hours.

Maintenance tasks to be performed every 100 operating hours.

Maintenance tasks to be performed every 500 operating hours.

Schedule for replacing various fluids and filters based on operating hours.

Table detailing quantities of fuels, coolants, and lubricants required.

Recommended engine oils for Zetor four-cylinder supercharged engines.

Recommended oils for tractor transmission gearing.

Recommended oils for the front drive axle.

Recommended oils for the tractor's hydrostatic steering system.

Recommended fluids for the tractor's hydraulic brake system.

Recommended fluids for the tractor's cooling system.

Recommended diesel fuel types for summer and winter operation.

A chart detailing lubrication points for various tractor components.

Daily check of the engine oil level using the dipstick.

Procedure for draining the engine oil.

Replacing the engine oil filter cartridge.

Correct procedure for filling the engine with oil.

Replacing the fuel filter cartridge and bleeding the fuel system.

Steps to bleed the fuel system after filter replacement or maintenance.

Maintaining the dry air cleaner and understanding the clogging indicator.

Daily check of the oil level in the hydrostatic steering tank.

Procedure for replacing oil and filtration cartridges in the steering system.

Steps to bleed the hydrostatic steering hydraulic circuit.

Procedure for draining and refilling the tractor's cooling system.

Checking and replacing oil in gearbox, axle drives, and rear axle portals.

How to refill the brake fluid reservoir for optimal braking.

Maintenance procedures for the air-conditioning system, focusing on the condenser.

Procedure for correctly tensioning the engine drive belt.

Adjusting valve clearance for optimal engine performance.

General order for bleeding different tractor brake systems.

Bleeding the pressure air brake system for trailers.

Bleeding the hydraulic circuit for the rear wheel brakes.

Steps for checking and adjusting both service and parking brakes.

Procedure for adjusting the tractor's service brakes.

Steps for adjusting the parking brake mechanism.

Specifications for Proxima Tier II tractor engines.

Specifications for Proxima Tier III tractor engines.

Table of tractor travel speeds based on engine and tyre conditions.