EasyManuals Logo

Zetor Proxima HS 100 User Manual

Zetor Proxima HS 100
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
Hydraulic syste
m
Hydraulics control panel
P+13N002
As a standard, the tractor is equipped with a rear three-point hitch control with mechanical regulation (A),
hereinafter referred to as mechanical hydraulics (the description of functions in a separate chapter).
Upon customer´s wish, the tractor may be equipped with a rear three-point hitch control with electronic
regulation, hereinafter referred to as electrohydraulics EHR (the description of functions in a separate
chapter).
1. Rear three-point hitch control (internal hydraulic circuit)
2. External h
y
draulic circuit control
It consists of the inner and outer circuits. Gear pump is the
source of pressure oil.
Oil is taken from reservoir shared by gearbox and
transmission.
Hydraulic pump cannot be switched off. If the engine is
working, the pump is on.
The amount supplied is:
standard 50 l/min
on request 60 l/min
The pressure in hydraulic system raised by the hydraulic
pump is restricted by a safety valve to 19 MPa.
P11N001
HYDRAULIC SYSTEM
113

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zetor Proxima HS 100 and is the answer not in the manual?

Zetor Proxima HS 100 Specifications

General IconGeneral
Engine Power100 HP
Displacement4.156 L
Number of Cylinders4
Hydraulic SystemOpen center
PTO Power85 HP
PTO Speed540/1000 RPM
Fuel Tank Capacity150 L
Max Speed40 km/h
Gears24 forward / 24 reverse

Related product manuals