Display - resetting dat
P18N047
The procedure for resetting data on the main screens where the data can be reset is as follows:
1 - Use the buttons (C) and (D) to select display of the corresponding main screen.
2 - Reset the data by longer pressing of the button (A) (RESET).
If you press the button (A), all data that can be reset on the selected screen would be reset.
Display - manual brake
If the tractor is not braked by a manual brake, a warning is
displayed on a display (letter P in a circle) and at the same
time a sound signal is heard. See the chapter "Driving
operation" for more.
Brake the tractor by a manual brake.
P18N072
To Next Page
Loading...
Need help?
General