Ballast weights are necessary to additionally load the tractor axles and to ensure manoeuvrability and
stability of the tractor.
Note: The weight of all ballast may vary by up to 5%.
Weights in front of the bonnet mask
Weights of the front three-point hitch
Weights of rear wheels
Valve for filling tyre tubes with liquid
Combination
of weights
(pcs)
Weights of weights
(kg)
4+1 4x50 + 67 267
8+1 8x50 + 67 467
12 12x50 600
PGPPN104
Number of
weights
(pcs)
Weight
(kg)
1 300
PGPPN103
- Mounting of weights for rear wheel treads 1,350 to
1,500 mm
B - Mounting of weights for rear wheel treads 1,575 to
1,800 mm
Combination of
weights (pcs)
Weights
(kg)
2+2 2x16 + 2x30 90
2+4 2x16 + 4x30 150
2+8 2x16 + 8x30 270
E553
All inner tubes of rear wheels are provided with valves that
allow their filling with a fluid if an extension is used.
Tubeless tyres cannot be filled with any fluid!
Only radial tubeless tyres can be filled with water for
urpose of additional loadin
. Filling of tubes of the
front wheel tyres and rear double wheels with a fluid
is not permitted!
To Next Page
Loading...
