Front tires steerabilit
Note : (prepared according to technical parameters of tyres Mitas)
The loading capacity values are applicable for front wheel gauge 1,525 - 1,610 mm and are in compliance
with loading capacity of the axle. Inflation values are minimum values, adapted to the maximum permitted
loading capacity of the axle.
In case of driving on hard surfaces it is suitable to increase pressure by 30 kPa with respect to slipping and
abrasion of the tyres.
Change of the load-bearing capacity of the front tyres (%)
Tire size
Travel speed
40 km.h
-1
Tire load capacity
(kg)
tire axle inflation (kPa)
1 pc
210/95R28 1250 2600 240
210/95R32 1400 2600 280
340/85R24 1650 2600 160
380/70R24 1650 2600 160
440/65R24 2120 2600 160
11,2-24 1000 2600 240
280/85R24 1215 2600 160
320/70R24 1250 2600 160
12,4-24 1120 2600 230
320/85R24 1500 2600 160
12,5/80-18 1550 2600 310
360/70R24 1500 2600 160
380/70R20 1500 2600 160
420/65R24 1850 2600 160
Travelling speed (km/h) diagonal radial
8 + 40 + 50
20 + 20 + 23
30 0 + 7
0 - 20 0
MAIN TECHNICAL PARAMETERS
To Next Page
Loading...
Need help?
General