Zetor Proxima GP Series User Manual

Locking control levers
Outer hydraulic circuit control levers are locked in neutral
(N) position.
To unlock them, raise the lock control (1) and turn it to
a stop point in the direction shown by the arrow.
To lock them again, move the levers to neutral (N) position
and turn the lock control in the opposite direction than
shown by the arrow to a stop point and push the control
down. This locks the lever in neutral position.
For safety reasons, always lock outer hydraulic
circuit levers in neutral position (N).
PGPPN083
ELECTRO-HYDRAULIC SYSTEM
140

Zetor Proxima GP Series Specifications

General

Brand	Zetor
Model	Proxima GP Series
Category	Tractor
Language	English