Zetor Proxima GP Series User Manual

The level of vibrations on driver´s seat
ZETOR tractors are classified in the category A and the class I/II/III. The category A includes all tractors with
specified levels of vibration due to similar specifications of the construction.
The following table presents the results of the measurement on the test bench according to the Commission
Delegated Regulation (EU) No. 1322/2014, Annex XIV. The value a*wS is a modified value of the effective
acceleration balanced according to vibration movement.
The following table is valid for all type series of Zetor tractors.
(1) Values corresponding to the weight of a driver 50 kg.
(2) Values corresponding to the weight of a driver 120 kg.
Aggregation tractor - machine/trailer
While working with machines, trailers or semi-trailers, all instructions from the manufacturers
of these aggregations must be adhered to!
Tractors equipped with front end loader
Zetor Tractors in standard design are designed for utilization in agriculture and are not designed for special
purposes.
Tractors designed for operation within the European Union must be equipped, in case of using front end
loader, with a protective structure (FOPS - Falling Object Protective Structure) protecting drivers from
potential falling objects.
It is necessary to observe applicable local valid regulations in countries which are not part of the European
Union.
Two types of cab roofs are mounted to Zetor tractors.
1. Standard cab roof
2. Cab roof designed for tractors equipped with front end loader meeting the OECD code 10 (FOPS)
conditions.
Tractors ZETOR supplied already from production with front end loader are equipped with cab roof according
to point 2.
From safety reasons, series ZETOR tractors supplied without front end loader with standard roof pursuant to
point 1 must not be equipped or used with front end loader.
In case of additional front end loader assembly, it is necessary to equip tractor with cab roof pursuant to point
2.
Only front end loaders approved by ZETOR TRACTORS may be mounted to ZETOR tractor.
A
dditional assembl
y
of front end loader approved b
y
ZETOR TRACTORS can be done onl
y
b
y
authorized ZETOR service.
It is forbidden to use front end loaders unapproved of by ZETOR TRACTORS.
Not observing this instruction may cause serious accidents.
Carefully observe instructions for use supplied by the manufacturer of front end loader.
Attachment points for assembly of the front loader to the tractor are specified in the manual of
the loader manufacturer. The manual must be approved by the company ZETOR TRACTORS.
Seat brand Suspension
Class I/II/III
a*
wS
(1)
(m/s²)
a*
wS
(2)
(m/s²)
SEARS mechanical 1.24 1.06
SEARS pneumatic 1.13 1.03
SAFETY INSTRUCTIONS FOR USERS
25

Zetor Proxima GP Series Specifications

General

Brand	Zetor
Model	Proxima GP Series
Category	Tractor
Language	English