243
ESSENTIAL TECHNICAL PARAMETERS
Allowed load of the tractor and axles
Table
Real value according to the
calculation
Allowed value according to the
manufacturer
Total tractor weight
Front axle load
Rear axle load
The real value according to the calculation must be lower or equal to the allowed value specified by the tractor manufacturer..
The driveability of the front axle must be preserved
under all load conditions, i.e., min. 20% of the real
tractor weight must lie on the front axle.
During aggregation with side moving machines, side
ditch trimmers and similar types of aggregation, there
is an unequal distribution of the load on the right and
on the left side of the tractor axle. It is necessary to
ensure that the load on one side of the axle does not
exceed ½ of the allowed load of the rear axle of the
tractor.
G
H max
- allowed load of the rear axle
To Next Page
Loading...
Need help?
General