65
DRIVING OPERATION
G207
G208
IMMEDIATELY AFTER STARTING
After starting set the engine
speed to 800 - 1000 rpm and let
the engine run without loading for
approx. 2 minutes.
During this time check the lubrication,
charging (the indicators must go off) and
other functions ensuring proper opera-
tion of the engine. The period of running
the engine without loading must be ob-
served, especially in winter.
ENGINE PREHEATING
Continue preheating the engine while driving. Preheating the engine by
means of a long idle run or abrupt increasing of the engine speed is harmful
for the engine.
Until the coolant temperature reaches 45°C, do not exceed the engine speed
of 2000 rpm.
To Next Page
Loading...
