13
TRANSPORT USE
D203 E304
AUTOMATIC GUIDING DEVICE OF
THE MULTI-STOREY HITCH CBM
>31/03/2007
Moving the lever (1) in direction of the ar-
row engages the pin (3) in its upper posi-
tion that is indicated by extracted indica-
tor (4), see Fig. (A).
After sliding the pole eye into the guide
device the pin is inserted automatically
into the eye of the trailer being attached.
The hitch pin (3) can also insert manually
by moving the lever (2) in direction of the
arrow. Insertion of the pin is indicated by
retracted indicator (4), see Fig. (B).
After connecting the trailer, it is
always necessary to check
whether the indicator (4) is re-
tracted as shown on Fig. (B).
AUTOMATIC GUIDING DEVICE OF
THE MULTI-STOREY HITCH CBM
01/04/2007<
Moving the lever (1) in direction of the ar-
row engages the pin (2) in its upper posi-
tion that is indicated by extracted indica-
tor (3), see Fig. (A).
After sliding the pole eye into the guide
device the pin is inserted automatically
into the eye of the trailer being attached.
The hitch pin (2) can also insert manually
by moving the lever (1) in direction of the
arrow. Insertion of the pin is indicated by
retracted indicator (3), see Fig. (B).
After connecting the trailer, it is
always necessary to check
whether the indicator (3) is re-
tracted as shown on Fig. (B).
To Next Page
Loading...
