32
ESSENTIAL TECHNICAL PARAMETERS
FORCES (KN) AND POWERS (KW) – ENGINES TIER III Type of tractor
Z 9641
Z 10641
Z 11441
Z 12441
Type of engine (TIER III)
Z 1005
Z 1305
Z 1405
Z 1505
Power on output shaft (kW ± 2%) at engine nominal speed
and engaged 1,000 rpm of output shaft
Engine not run-in (up to 100 Mh)
53.6 60.8 66.5 73.9
Run-in engine (more than 100 Mh) 56.5 64.0 70.0 77.8
Maximum tractive force on swinging tow bar (kN)
- on concrete with tractor in standard design, ready to
drive, with max. weight of additional weights with slipping
15% and driver in the cab
34.3 37.2 38.9 43
Maximum tractive force on multi-storey hitch for trailer (kN)
- In hitch middle position, on concrete with tractor in stan-
dard design, ready to drive, with max. weight of addi-
tional weights, water in tyres and driver in the cab
37.8 42.3 44.2 47.7
Lifting force at end of lower pull rods of the 3-point hitch,
within full stroke, at max. usable pressure, with auxiliary
cylinder (kN)
48,4
Lifting force at end of lower pull rods of the front 3-point
hitch, within full stroke, at max. usable pressure (kN)
Front 3-point hitch Zetor 24
Front 3-point hitch Zuidberg 35
To Next Page
Loading...
