To Next PageTo Next Page
Need help?Do you have a question about the Zhiyun CRANE-M3 and is the answer not in the manual?
General| Battery Runtime | Up to 8 hours |
|---|---|
| Bluetooth | Yes |
| Tilting Range | 309° |
| Rolling Range | 333° |
| Panning Range | 360° |
| Battery Capacity | 1150mAh |
| Operating Voltage | 9.6V to 12.6V |
| Storage Temperature | -20°C to 60°C |
| USB Port | USB-C |
| Charging Time | 2 hours |
| Weight | 700g |
| Display | OLED |
| Operating Temperature | -10°C to 45°C |
| Wireless Protocol | Bluetooth 5.0 |
| Control Interface | USB-C, Bluetooth |
| Wi-Fi | Wi-Fi 2.4 GHz (For Camera Control) |
Attach the tripod to the bottom of the CRANE-M3 handle and unfold it.
Lock gimbal axes for installation, mount camera on quick release plate, tighten screw.
Mount phone to clamp, then clamp to quick release plate, tighten screw.
Mount action camera to base, then base to quick release plate, tighten screw.
Balance the camera by adjusting tilt, roll, and pan axes for stability.
Unlock roll axis, loosen latch, move arm to keep camera horizontal, tighten latch.
Unlock pan axis, loosen latch, tilt handle to keep axis still, tighten latch.
Details on the function of each button on the CRANE-M3 gimbal controller.
Instructions for upgrading CRANE-M3 firmware using Gimbal Tools or ZY Play app.
Procedure for performing six-side calibration via APP or Zhiyun Gimbal Tools.
Detailed safety guidelines for using, charging, and storing the CRANE-M3.
