Zhiyun Crane 3 Lab User Manual (English)

Questions and Answers:

P
pbernardJul 28, 2025
Why does the Zhiyun Camera Accessories stabilizer show an 'over heat' icon?
- P
  Phillip MyersJul 28, 2025
  The 'over heat' icon on your Zhiyun Camera Accessories stabilizer may appear due to several reasons: the ambient temperature is too high (ensure it's between -10 and 45 degrees), the weight on the stabilizer is not between 650 and 4500g, the stabilizer is not balanced properly (follow the balancing steps in the manual), the safety lock on the axis hasn't been released (release the stabilizer safety lock switch), or the cable interferes with the stabilizer motor (ensure the connection cable doesn’t interfere with the motor). After resolving these issues and the stabilizer temperature returns to normal, restart the stabilizer.
A
Alicia SanchezAug 4, 2025
What to do if Zhiyun Crane 3 Lab stabilizer makes five "Di" sounds and shows "axis lock"?
- L
  Loretta HendersonAug 4, 2025
  If your Zhiyun Camera Accessories stabilizer emits five "Di" sounds and displays "axis lock", the stabilizer safety lock is likely not released. Make sure to release the stabilizer safety lock switch.
H
Hannah WilkinsAug 12, 2025
Why the pan axis cannot be rotated under Vortex Mode on Zhiyun Crane 3 Lab?
- R
  Robert NguyenAug 12, 2025
  If the pan axis on your Zhiyun Camera Accessories cannot be rotated in Vortex Mode, it's likely due to the stabilizer not being properly balanced. Follow the balancing steps in the manual, paying particular attention to the pan axis adjustment.
J
Jessica HendersonAug 18, 2025
What to do if the quick release plate of Zhiyun Crane 3 Lab Camera Accessories stabilizer cannot be locked?
- C
  Christopher LeeAug 18, 2025
  If the quick release plate on your Zhiyun Camera Accessories stabilizer cannot be locked, it might be because the quick release plate locking latch has reached its limit. Lift the latch and adjust its starting position to achieve the appropriate tightness.

Zhiyun Crane 3 Lab Specifications

General

Charging Time	4 hours
Weight	1.88 kg
Axis	3-axis
Tilting Angle	360°
Panning Angle	360°
Following Deviation in Static State	±0.01°
Bluetooth	Yes
Follow Focus	Yes
Battery Runtime	7.5 hours
Camera Compatibility	DSLR and Mirrorless Cameras
Type	Handheld Gimbal
Battery Life	7.5 hours
Compatible Cameras	DSLR, Mirrorless, Cinema Cameras
Mounting Options	1/4"-20
Material	Aluminum Alloy
Following Deviation in Motion State	±0.05°